Thermal insulation for temperature sensitive cargoes in containers, on pallets and other uses “ISOL-CARGO®” + “ISOL-CONTAINER®”

Super thermo cover against temperature fluctuations (heat and cold)

Type PT2B1: insulation blanket: one layer of air bubbles, one layer of metallic film on each side, total thickness approx. 4.5 mm, equivalent to approx. 3 cm glass wool.

Type 2L1: insulation blanket: one layer of air bubbles, one layer of aluminum film on each side, total thickness approx. 4 mm, equivalent to approx. 4 cm glass wool.

Type 2L2: insulation blanket: two layers of air bubbles, one layer of aluminum film on each side, total thickness approx. 8 mm, equivalent to approx. 5-6 cm glass wool.

“ISOL-CONTAINER®” insulation kits for 20’ and 40’ container:

Precut, ready for use

Placing along the walls
Placing along the walls
Container walls covered by insulation blanket (walls + roof)
Container walls covered
by insulation blanket
(walls + roof)
Covering of the load by insulation blanket
Covering of the load by
insulation blanket
End of the insulation blanket in front ofthe doors
End of the insulation
blanket in front of the
doors

“ISOL-CONTAINER®” carpets for a complete insulation protection

Very strong, allowing pallet car and forklift transfer onto the carpet

Precut, ready for use

ISOL-CONTAINER ISOL-CONTAINER

“ISOL-CARGO®” in rolls (1,20 m width) or tailor made covers:

ISOL-CARGO ISOL-CARGO