Equipments for the containerization

Second part: Equipments for the containerization

Customized ISO containers

For special use and containers DRY, Open Top, Hard Top and so on

Container shifting on the ground and on rail tracks

Shifting on the ground and on rail tracks of ISO containers and shelters with bottom ISO corners.

Portuary vehicle handling

Car lifting platform, cars and trucks (single or double axles) handling by tubes and slings

Lifting by frames and beams (customized)

Special conception for pre-slinged sacks or big bags lifting, heavy loads (up to 120 tons) and so on.

ISO container handling by spreader and  with  ISO hooks

  1. Our spreaders can be disassembled for transport into 20’ or 40’ containers.

    • “H” conception and frame spreaders
    • Manual, automatic and electrical locking from the ground or from a crane cabin.
    • Mix lifting by crane and forklift
    • Spreaders with mechanical center of gravity adjustment
    • “DUO” same spreader for 10’+20’ or 20’+30’ or 20’+40’ containers
    • Over height frame for open top or flat containers
  2. Lifting Hooks (ISO) for containers, shelters with ISO corners and all types of ISO constructions:
    Hooked into the upper ISO corners or into the bottom ISO corners (sidewise or vertical locking).

Lifting traverse (cross bar) for 20’ +30’ + 40’ containers and shelters with bottom ISO corners

With slings and ISO hooks (sidewise hooking type C2) and on request with anti-unhooking device

Lifting Hooks (ISO) for containers, shelters with ISO corners and all types of ISO constructions

Hooked into the upper ISO corners or into the bottom ISO corners (sidewise or vertical locking).

Vertical container lifting by 4 electro-hydraulic jacks

For all types of ISO containers (10’, 20, 30’, 40’, 45’) up to 35 tons

Horizontal loading system for “DRY” containers

For heavy and bulky cargoes loading into “DRY” containers, avoiding the over costs of an OPEN TOP or FLAT containers